Home / Technology / How To Replace French Door Handles?

How To Replace French Door Handles?

November 10, 2022

The doors you have on your exterior serve two purposes and must look attractive, and also serve as a barrier that keeps warm air in and intrusions out. When most people are looking for new doors for their exterior the primary considerations are the appearance and price, but it is important to consider security, too, particularly when you're dealing with French doors, which can be quite big and have lots of glass.

Modern French doors are equipped with double glazing and strong frames, meaning that French doors can be safe. The significance of the lock and handle must not be overlooked, however, since an unsecured handle or a tiny lock can be easily forced to open. If your door is an older French door, the handle might not be in line with the latest standards.

Why Should You Replace External French Door Handles?

There are many reasons you may want to replace the handles on your exterior French doors. The most obvious reason is that the handle is damaged. Exterior doors see lots of use and are being exposed to elements. The older doors might have handles that are cheap "stock" handles, which may be useful but are not top-of-the-line in terms of design or quality. Removing the handles is cheaper and less costly than replacing the entire door with Locks Repair Brampton.

It is also possible to replace the handles on your doors in order to bring new life into old doors. A new handle will cost only a tiny fraction of what a door will cost and can totally alter the appearance of your house. It's not a long time to change handles on doors which makes it a quick and efficient way to refresh the exterior of your house.

A better security level is another reason to change the door handles. Most modern handles feature double locking systems that have large strong locks. They are stronger and more difficult to open. Additionally, it is possible to purchase multi-point locking systems at a low cost as well. If you are locking your French doors using one Yale key, you might want to consider looking for something more sturdy.

replace-french-door-handles

What Are The Different Types Of External French Door Locks?

There are many different types of door locks suitable for French doors, which include:

  • Top and bottom-operated keys These locks are commonly found on contemporary patio doors.
  • Central rail key-operated locks aren't commonly used on French doors but can be found for other types of patio doors, such as sliding doors. They provide more security than standard locks.
  • Locking systems with multi-point keys feature a rim locking mechanism that locks the door into the frame (or into the door) and provides better security as it makes it difficult to open the door.

What Is The Best Way To Replace French Patio Door Handles

Exterior French doors come with two doors that swing outwards and away from one another to create a large entrance. The doors lock onto one another, not the frame of the door, with the handles that they have. This is why it's vital that the locking mechanism is durable and secure to ensure that doors cannot be opened forcefully.
The handle with the active function can move the latch whenever it is turned. the handle opposite is an 'in-between' handle. This handle lock is situated on the opposite side of the handle active. It is important to think about this prior to installing the locks and handles.

What Is The Best Way To Install French Door Handles?

Choose which side is the handle in use and locate the pin that locks the cylinder. It's a long and flat piece of steel that is affixed to the hole for the key and goes through the door to the opposite side. The pin is turned clockwise to create an active handle to the left or it is counter-clockwise if the handle in use is to the right.
When the door is brand new then you can drill holes into them. If you're replacing old handles, you may be lucky enough to find the holes that are currently in place fit perfectly. If not, make use of the hole-boring templates that came together with handles, to decide where the holes should be. Utilize a drill and hole saw to make the holes. Most of the time you'll need an enormous hole to fit the knob on the door, and smaller holes for the mechanism of the lock. It is also necessary to have two holes along the door's edge, to house the mechanism for the lock and latch. Rather contact experts of  Locksmith Toronto.

french-door-handles

Next:

  • Insert the actuator slot into the hole for the locking mechanism, which is located on the door's active side.
  • Install the bolt of the lock into the hole on the outside of the door. Then join it with the actuator. The design of the handle may require that you insert the bolt first, then connect it to the actuator. Review the instruction manual included with the door to get more detailed instructions.
  • The faceplate is put in place on the door, then move the lock's pin into the slot for the actuator.
  • Attach the face plate to the door. Screw the outside plate into place first and then slide the interior plate onto the pin on the lock's cylinder and screw them in position.
  • The handles should be attached to the doors, and secure with the set screw.
  • Move the latching mechanism into the hole for latching at the door's edge.
  • Install the plates together, including the outer plate that protects the locking and latching mechanisms.
  • Test the latch and lock to verify that the handle is working well, and then tighten the plates with a firm.

The same procedure should be followed for the opposite side of the handle, leaving out the latch and lock mechanism sets. This is due to the fact that the dummy handle rotates when it is installed however the handle doesn't actually move any moving components. The edge plate on the handle's side will have two holes that take in the latch and lock bolt. Make sure that these holes align with the ones on the door that is in use.